Pubblications 1991 – 2000

  • 2000

    Barbosa, S.E., Capiati, N.J., Kenny, J.M. Processability and mechanical properties of ternary composites PP/EPDM/GF (2000), Polymer Composites, 21 (3), pp. 377-386.

    Alcaraz, J., Alpat, B., Ambrosi, G., Anderhub, H., Ao, L., Arefiev, A., Azzarello, P., Babucci, E., Baldini, L., Basile, M., Barancourt, D., Barao, F., Barbier, G., Barreira, G., Battiston, R., Becker, R., Becker, U., Bellagamba, L., Béné, P., Berdugo, J., Berges, P., Bertucci, B., Biland, A., Bizzaglia, S., Blasko, S., Boella, G., Boschini, M., Bourquin, M., Brocco, L., Bruni, G., Buenerd, M., Burger, J.D., Burger, W.J., Cai, X.D., Camps, C., Cannarsa, P., Capell, M., Casadei, D., Casaus, J., Castellini, G., Cecchi, C., Chang, Y.H., Chen, H.F., Chen, H.S., Chen, Z.G., Chernoplekov, N.A., Chiueh, T.H., Chuang, Y.L., Cindolo, F., Commichau, V., Contin, A., Cristinziani, M., Da Cunha, J.P., Dai, T.S., Deus, J.D., Dinu, N., Djambazov, L., D’Antone, I., Dong, Z.R., Emonet, P., Engelberg, J., Eppling, F.J., Eronen, T., Esposito, G., Extermann, P., Favier, J., Fiandrini, E., Fisher, P.H., Fluegge, G., Fouque, N., Galaktionov, Yu., Gervasi, M., Giusti, P., Grandi, D., Grimm, O., Gu, W.Q., Hangarter, K., Hasan, A., Hermel, V., Hofer, H., Huang, M.A., Hungerford, W., Ionica, M., Ionica, R., Jongmanns, M., Karlamaa, K., Karpinski, W., Kenney, G., Kenny, J., Kim, W., Klimentov, A., Kossakowski, R., Koutsenko, V., Kraeber, M., Laborie, G., Laitinen, T., Lamanna, G., Etal. Helium in near earth orbit (2000), Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics, 494 (3-4), pp. 193-202.

    Torre, L., Kenny, J.M. Impact testing and simulation of composite sandwich structures for civil transportation (2000), Composite Structures, 50 (3), pp. 257-267.

    Barbosa, S.E., Kenny, J.M. Analysis of the ductility on short fiber reinforced polypropylene plates (2000), Journal of Elastomers and Plastics, 32 (4), pp. 302-310.

    López Manchado, M.A., Biagiotti, J., Torre, L., Kenny, J.M. Effects of reinforcing fibers on the crystallization of polypropylene (2000), Polymer Engineering and Science, 40 (10), pp. 2194-2204.

    Di Schino, A., Kenny, J.M., Mecozzi, M.G., Barteri, M. Development of high nitrogen, low nickel, 18%Cr austenitic stainless steels (2000), Journal of Materials Science, 35 (19), pp. 4803-4808.

    Alcaraz, J., Alpat, B., Ambrosi, G., Anderhub, H., Ao, L., Arefiev, A., Azzarello, P., Babucci, E., Baldini, L., Basile, M., Barancourt, D., Barao, F., Barbier, G., Barreira, G., Battiston, R., Becker, R., Becker, U., Bellagamba, L., Béné, P., Berdugo, J., Berges, P., Bertucci, B., Biland, A., Bizzaglia, S., Blasko, S., Boella, G., Boschini, M., Bourquin, M., Brocco, L., Bruni, G., Buenerd, M., Burger, J.D., Burger, W.J., Cai, X.D., Camps, C., Cannarsa, P., Capell, M., Casadei, D., Casaus, J., Castellini, G., Cecchi, C., Chang, Y.H., Chen, H.F., Chen, H.S., Chen, Z.G., Chernoplekov, N.A., Chiueh, T.H., Chuang, Y.L., Cindolo, F., Commichau, V., Contin, A., Crespo, P., Cristinziani, M., da Cunha, J.P., Dai, T.S., Deus, J.D., Dinu, N., Djambazov, L., D’Antone, I., Dong, Z.R., Emonet, P., Engelberg, J., Eppling, F.J., Eronen, T., Esposito, G., Extermann, P., Favier, J., Fiandrini, E., Fisher, P.H., Fluegge, G., Fouque, N., Galaktionov, Y., Gervasi, M., Giusti, P., Grandi, D., Grimm, O., Gu, W.Q., Hangarter, K., Hasan, A., Hermel, V., Hofer, H., Huang, M.A., Hungerford, W., Ionica, M., Ionica, R., Jongmanns, M., Karlamaa, K., Karpinski, W., Kenney, G., Kenny, J., Kim, W., Klimentov, A., Kossakowski, R., Koutsenko, V., Kraeber, M., Laborie, G., Laitinen, T., Lamanna, G., Laurenti, G., Lebedev, A., Lee, S.C., Levi, G., Levtchenko, P., Liu, C.L., Liu, H.T., Lopes, I., Lu, G., Lu, Y.S., Lübelsmeyer, K., Luckey, D., Lustermann, W., Maña, C., Margotti, A., Mayet, F., McNeil, R.R., Meillon, B., Menichelli, M., Mihul, A., Mourao, A., Mujunen, A., Palmonari, F., Papi, A., Park, I.H., Pauluzzi, M., Pauss, F., Perrin, E., Pesci, A., Pevsner, A., Pimenta, M., Plyaskin, V., Pojidaev, V., Pohl, M., Postolache, V., Produit, N., Rancoita, P.G., Rapin, D., Raupach, F., Ren, D., Ren, Z., Ribordy, M., Richeux, J.P., Riihonen, E., Ritakari, J., Roeser, U., Roissin, C., Sagdeev, R., Sartorelli, G., Schultz von Dratzig, A., Schwering, G., Scolieri, G., Seo, E.S., Shoutko, V., Shoumilov, E., Siedling, R., Son, D., Song, T., Steuer, M., Sun, G.S., Suter, H., Tang, X.W., Samuel Ting, C.C., Ting, S.M., Tornikoski, M., Torsti, J., Trümper, J., Ulbricht, J., Urpo, S., Usoskin, I., Valtonen, E., Vandenhirtz, J., Velcea, F., Velikhov, E., Verlaat, B., Vetlitsky, I., Vezzu, F., Vialle, J.P., Viertel, G., Vité, D., Von Gunten, H., Waldmeier Wicki, S., Wallraff, W., Wang, B.C., Wang, J.Z., Wang, Y.H., Wiik, K., Williams, C., Wu, S.X., Xia, P.C., Yan, J.L., Yan, L.G., Yang, C.G., Yang, M., Ye, S.W., Yeh, P., Xu, Z.Z., Zhang, H.Y., Zhang, Z.P., Zhao, D.X., Zhu, G.Y., Zhu, W.Z., Zhuang, H.L., Zichichi, A., Zimmermann, B. Cosmic protons (2000), Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics, 490 (1-2), pp. 27-35.

    Torre, L., Kenny, J.M., Boghetich, G., Maffezzoli, A. Degradation behaviour of a composite material for thermal protection systems. Part III. Char characterization (2000), Journal of Materials Science, 35 (18), pp. 4563-4566.

    López-Manchado, M., Torre, L., Kenny, J.M. Kinetic analysis of the thermal degradation of PP-EPDM blends (2000), Rubber Chemistry and Technology, 73 (4), pp. 694-705.

    Cyras, V.P., Vázquez, A., Rozsa, Ch., Galego Fernández, N., Torre, L., Kenny, J.M. Thermal stability of P(HB-co-HV) and its blends with polyalcohols: crystallinity, mechanical properties, and kinetics of degradation
    (2000), Journal of Applied Polymer Science, 77 (13), pp. 2889-2900.

    Alcaraz, J., Alpat, B., Ambrosi, G., Anderhub, H., Ao, L., Arefiev, A., Azzarello, P., Babucci, E., Baldini, L., Basile, M., Barancourt, D., Barao, F., Barbier, G., Barreira, G., Battiston, R., Becker, R., Becker, U., Bellagamba, L., Béné, P., Berdugo, J., Berges, P., Bertucci, B., Biland, A., Bizzaglia, S., Blasko, S., Boella, G., Boschini, M., Bourquin, M., Brocco, L., Bruni, G., Buenerd, M., Burger, J.D., Burger, W.J., Cai, X.D., Camps, C., Cannarsa, P., Capell, M., Casadei, D., Casaus, J., Castellini, G., Cecchi, C., Chang, Y.H., Chen, H.F., Chen, H.S., Chen, Z.G., Chernoplekov, N.A., Chiueh, T.H., Chuang, Y.L., Cindolo, F., Commichau, V., Contin, A., Crespo, P., Cristinziani, M., da Cunha, J.P., Dai, T.S., Deus, J.D., Dinu, N., Djambazov, L., D’Antone, I., Dong, Z.R., Emonet, P., Engelberg, J., Eppling, F.J., Eronen, T., Esposito, G., Extermann, P., Favier, J., Fiandrini, E., Fisher, P.H., Fluegge, G., Fouque, N., Galaktionov, Y., Gervasi, M., Giusti, P., Grandi, D., Grimm, O., Gu, W.Q., Hangarter, K., Hasan, A., Hermel, V., Hofer, H., Huang, M.A., Hungerford, W., Ionica, M., Ionica, R., Jongmanns, M., Karlamaa, K., Karpinski, W., Kenney, G., Kenny, J., Kim, W., Klimentov, A., Kossakowski, R., Koutsenko, V., Kraeber, M., Laborie, G., Laitinen, T., Lamanna, G., Laurenti, G., Lebedev, A., Lee, S.C., Levi, G., Levtchenko, P., Liu, C.L., Liu, H.T., Lopes, I., Lu, G., Lu, Y.S., Lübelsmeyer, K., Luckey, D., Lustermann, W., Maña, C., Margotti, A., Mayet, F., McNeil, R.R., Meillon, B., Menichelli, M., Mihul, A., Mourao, A., Mujunen, A., Palmonari, F., Papi, A., Park, I.H., Pauluzzi, M., Pauss, F., Perrin, E., Pesci, A., Pevsner, A., Pimenta, M., Plyaskin, V., Pojidaev, V., Postolache, V., Produit, N., Rancoita, P.G., Rapin, D., Raupach, F., Ren, D., Ren, Z., Ribordy, M., Richeux, J.P., Riihonen, E., Ritakari, J., Roeser, U., Roissin, C., Sagdeev, R., Sartorelli, G., Schultz von Dratzig, A., Schwering, G., Scolieri, G., Seo, E.S., Shoutko, V., Shoumilov, E., Siedling, R., Son, D., Song, T., Steuer, M., Sun, G.S., Suter, H., Tang, X.W., Samuel Ting, C.C., Ting, S.M., Tornikoski, M., Torsti, J., Trümper, J., Ulbricht, J., Urpo, S., Usoskin, I., Valtonen, E., Vandenhirtz, J., Velcea, F., Velikhov, E., Verlaat, B., Vetlitsky, I., Vezzu, F., Vialle, J.P., Viertel, G., Vité, D., von Gunten, H., Waldmeier Wicki, S., Wallraff, W., Wang, B.C., Wang, J.Z., Wang, Y.H., Wiik, K., Williams, C., Wu, S.X., Xia, P.C., Yan, J.L., Yan, L.G., Yang, C.G., Yang, M., Ye, S.W., Yeh, P., Xu, Z.Z., Zhang, H.Y., Zhang, Z.P., Zhao, D.X., Zhu, G.Y., Zhu, W.Z., Zhuang, H.L., Zichichi, A., Zimmermann, B. Leptons in near earth orbit (2000), Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics, 484 (1-2), pp. 10-22.

    Barbosa, S.E., Kenny, J.M. Processing of short-fiber reinforced polypropylene. I. Influence of processing conditions on the morphology of extruded filaments
    (2000) Polymer Engineering and Science, 40 (1), pp. 11-22.

    López Manchado, M.A., Biagiotti, J., Torre, L., Kenny, J.M. Polypropylene crystallization in an ethylene-propylene-diene rubber matrix (2000,) Journal of Thermal Analysis and Calorimetry, 61 (2), pp. 437-450.

    Di Schino, A., Mecozzi, M.G., Barteri, M., Kenny, J.M. Solidification mode and residual ferrite in low-Ni austenitic stainless steels (2000), Journal of Materials Science, 35 (2), pp. 375-380.

    Jiménez, A., Iannoni, A., Torre, L., Kenny, J.M. Kinetic modeling of the thermal degradation of stabilized PVC plastisols (2000), Journal of Thermal Analysis and Calorimetry, 61 (2), pp. 483-491.

    Torre, L., Kenny, J.M., Recca, A., Siracusa, V., Tarzia, A., Maffezzoli, A.
    Study of the crystallization of an aromatic poly-ether-ketone (PK99) by calorimetric and X-ray analysis (2000), Journal of Thermal Analysis and Calorimetry, 61 (2), pp. 565-578.

  • 1999

    López-Manchado, M.A., Biagiotti, J., Arroyo, M., Kenny, J.M. Processing, properties and morphology of polypropylene-EPDM blends (1999), Macromolecular Symposia, 148, pp. 345-360.

    Alcaraz, J., Alvisi, D., Alpat, B., Ambrosi, G., Anderhub, H., Ao, L., Arefiev, A., Azzarello, P., Babucci, E., Baldini, L., Basile, M., Barancourt, D., Barao, F., Barbier, G., Barreira, G., Battiston, R., Becker, R., Becker, U., Bellagamba, L., Béné, P., Berdugo, J., Berges, P., Bertucci, B., Biland, A., Bizzaglia, S., Blasko, S., Boella, G., Bourquin, M., Bruni, G., Buenerd, M., Burger, J.D., Burger, W.J., Cai, X.D., Cavalletti, R., Camps, C., Cannarsa, P., Capell, M., Casadei, D., Casaus, J., Castellini, G., Chang, Y.H., Chen, H.S., Chen, Z.G., Chernoplekov, N.A., Chiarini, A., Chiueh, T.H., Chuang, Y.L., Cindolo, F., Commichau, V., Contin, A., Cotta-Ramusino, A., Crespo, P., Cristinziani, M., daCunha, J.P., Dai, T.S., Deus, J.D., Ding, L.K., Dinu, N., Djambazov, L., D’Antone, I., Dong, Z.R., Emonet, P., Eppling, F.J., Eronen, T., Esposito, G., Extermann, P., Favier, J., Feng, C.C., Fiandrini, E., Finelli, F., Fisher, P.H., Flaminio, R., Fluegge, G., Fouque, N., Galaktionov, Y., Gervasi, M., Giusti, P., Gu, W.Q., Guzik, T.G., Hangarter, K., Hasan, A., Hermel, V., Hofer, H., Huang, M.A., Hungerford, W., Ionica, M., Ionica, R., Isbert, J., Jongmanns, M., Karpinski, W., Kenney, G., Kenny, J., Kim, W., Klimentov, A., Krieger, J., Kossakowski, R., Koutsenko, V., Laborie, G., Laitinen, T., Lamanna, G., Laurenti, G., Lebedev, A., Lee, S.C., Levi, G., Levtchenko, P., Li, T.P., Liu, C.L., Liu, H.T., Lolli, M., Lopes, I., Lu, G., Lu, Y.S., Lübelsmeyer, K., Luckey, D., Lustermann, W., Maehlum, G., Maña, C., Margotti, A., Massera, F., Mayet, F., McNeil, R.R., Meillon, B., Menichelli, M., Mezzanotte, F., Mezzenga, R., Mihul, A., Molinari, G., Mourao, A., Mujunen, A., Palmonari, F., Pancaldi, G., Papi, A., Park, I.H., Pauluzzi, M., Pauss, F., Perrin, E., Pesci, A., Pevsner, A., Pilastrini, R., Pimenta, M., Plyaskin, V., Pojidaev, V., Postema, H., Prati, E., Produit, N., Rancoita, P.G., Rapin, D., Raupach, F., Recupero, S., Ren, D., Ren, Z., Ribordy, M., Richeux, J.P., Riihonen, E., Ritakari, J., Roeser, U., Roissin, C., Sagdeev, R., Santos, D., Sartorelli, G., SchultzvonDratzig, A., Schwering, G., Shoutko, V., Shoumilov, E., Siedling, R., Son, D., Song, T., Steuer, M., Sun, G.S., Suter, H., Tang, X.W., Ting, S.C.C., Ting, S.M., Tenbusch, F., Torromeo, G., Torsti, J., Trümper, J., Ulbricht, J., Urpo, S., Usoskin, I., Valtonen, E., Vandenhirtz, J., Velikhov, E., Verlaat, B., Vetlitsky, I., Vezzu, F., Vialle, J.P., Viertel, G., Vité, D., VonGunten, H., Waldmeier Wicki, S., Wallraff, W., Wang, B.C., Wang, J.Z., Wang, Y.H., Wefel, J.P., Werner, E.A., Williams, C., Wu, S.X., Xia, P.C., Yan, J.L., Yan, L.G., Yang, C.G., Yang, M., Yeh, P., Zhang, H.Y., Zhao, D.X., Zhu, G.Y., Zhu, W.Z., Zhuang, H.L., Zichichi, A. Arch for antihelium in cosmic rays (1999), Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics, 461 (4), pp. 387-396.

    Kenny, J.M., Torre, L. Impact testing and simulation of sandwich structures (1999) International SAMPE Symposium and Exhibition (Proceedings), 44, p. II/.

    Guarino, F.S., Hauviller, C., Kenny, J.M. Radiation effects on room temperature epoxy adhesive molecular structure: Mechanical tests and correlation with calorimetric and outgassing analyses (1999), Journal of Macromolecular Science – Physics, 38, .

    Manfredi, L.B., Claro, J.A., Kenny, J.M., Mondragón Egaña, I., Vázquez, A. Processing and properties of resol and epoxy blends for resin transfer molding
    (1999), Polymer Composites, 20 (5), pp. 675-682.

    Vázquez, A., Domínguez, V.A., Kenny, J.M. Bagasse fiber-polypropylene based composites (1999), Journal of Thermoplastic Composite Materials, 12 (6), pp. 477-497.

    Barbosa, S.E., Kenny, J.M. Processing of short fiber reinforced polypropylene. II: statistical study of the effects of processing conditions on the impact strength (1999), Polymer Engineering and Science, 39 (10), pp. 1880-1890.

    Aranguren, M.I., Reboredo, M.M., Demma, G., Kenny, J. Oak sawdust and hazelnut shells as fillers for a polyester thermoset(1999), Holz als Roh – und Werkstoff, 57 (5), pp. 325-330.

    Buccioni, E., Braca, E., Kenny, J.M., Terranova, M.L. Processing-structure-adhesion relationship in CVD diamond films on titanium substrates (1999), Diamond and Related Materials, 8 (1), pp. 17-24.

    Barbosa, Silvia E., Kenny, Jose M. Analysis of the relationship between processing conditions – fiber orientation – final properties in short fiber reinforced polypropylene (1999), Journal of Reinforced Plastics and Composites, 18 (5), pp. 413-420.

    Jimenez, A., Lopez, J., Torre, L., Kenny, J.M. Kinetic analysis of the thermal degradation of PVC plastisols (1999), Journal of Applied Polymer Science, 73 (6), pp. 1069-1079.

  • 1998

    Torre, L., Kenny, J.M., Maffezzoli, A.M. Degradation behaviour of a composite material for thermal protection systems Part I-Experimental characterization
    (1998), Journal of Materials Science, 33 (12), pp. 3137-3143.

    De La Caba, K., Guerrero, P., Mondragon, I., Kenny, J.M. Comparative study by DSC and FTIR techniques of an unsaturated polyester resin cured at different temperatures (1998), Polymer International, 45 (4), pp. 333-338.

    Torre, L., Kenny, J.M., Maffezzoli, A.M. Degradation behaviour of a composite material for thermal protection systems. Part II Process simulation (1998), Journal of Materials Science, 33 (12), pp. 3145-3149.

    Maffezzoli, A., Torre, L., Kenny, J.M. Determination of the crystallization enthalpy of new-TPI (1998), Journal of Applied Polymer Science, 67 (4), pp. 763-766.

    Barbosa, Silvia E., Kenny, Jose M. Dynamic fracture of short fiber reinforced polypropylene (1998,) Annual Technical Conference – ANTEC, Conference Proceedings, 2, pp. 1437-1441.

  • 1997

    Torre, Luigi, Kenny, Jose M. Thermal degradation kinetics of poly ether imide (PEI) (1997) Annual Technical Conference – ANTEC, Conference Proceedings, 2, pp. 1728-1732.

    Barbosa, Silvia E., Kenny, Jose M. Analysis of the relationship between processing conditions – fiber orientation – final properties in short fiber reinforced polypropylene (1997), Annual Technical Conference – ANTEC, Conference Proceedings, 2, pp. 1855-1859.

    Barbosa, Silvia E., Kenny, Jose M., Ercoli, Daniel R., Bibbo, Miguel A.
    Rheology of fiber suspensions in polymeric systems: An innovative method of experimental testing (1997), Annual Technical Conference – ANTEC, Conference Proceedings, 2, pp. 2189-2193.

  • 1996

    Kenny, J.M., Opalicki, M. Processing of short fibre/thermosetting matrix composites (1996,) Composites Part A: Applied Science and Manufacturing, 27 (3 PART A), pp. 229-240.

    Moschiar, S.M., Reboredo, M.M., Kenny, J.M., Vázquez, A. Analysis of pultrusion processing of composites of unsaturated polyester resin with glass fibers
    (1996), Polymer Composites, 17 (3), pp. 478-485.

    Barbosa, Silvia E., Kenny, Jose M. Effects of processing conditions on the microstructure of polypropylene and its short fiber composites (1996), Journal of Engineering and Applied Science, 2, pp. 2246-2255.

    Opalicki, M., Kenny, J.M., Nicolais, L. Cure kinetics of neat and carbon-fiber-reinforced TGDDM/DDS epoxy systems (1996), Journal of Applied Polymer Science, 61 (6), pp. 1025-1037.

    Mezzenga, R., Guarino, F.S., Butin, F., Perrin, E., Kenny, J.M. Structural analysis of thin composite tubes used in the anti-matter spectrometer (1996), Computer Aided Design in Composite Material Technology – International Conference, pp. 365-374.

    Mollinari, M., Marchetti, M., Kenny, J.M. Elasto-plastic fatigue behavior of high performance thermoplastic composite laminates (1996,) Journal of Advanced Materials, 27 (2), pp. 52-60.

    Mijović, J., Andjelić, S., Kenny, J.M. In situ real-time monitoring of epoxy/amine kinetics by remote near infrared spectroscopy (1996), Polymers for Advanced Technologies, 7 (1), pp. 1-16.

  • 1995

    Torre, L., Maffezzoli, A., Nicolais, L. Process modelling of thermoset based composites (1995), Revue de l’Institute Francais du Petrole, 50 (1), pp. 135-139.

    Kenny, J.M., Pisaniello, G., Farina, F., Puzziello, S. Calorimetric analysis of the polymerization reaction of a phenolic resin (1995), Thermochimica Acta, 269-270 (C), pp. 201-211.

    Maffezzoli, A., Kenny, J.M., Torre, L. On the physical dimensions of the Avrami constant (1995), Thermochimica Acta, 269-270 (C), pp. 185-190.

    Kenny, J.M., Marchetti, M. Elasto-plastic behavior of thermoplastic composite laminates under cyclic loading (1995), Composite Structures, 32 (1-4), pp. 375-382.

    Torre, Luigi, Maffezzoli, Alfonso, Kenny, Jose M. Macrokinetic approach to crystallization applied to a new thermoplastic polyimide (new TPI) as a model polymer (1995), Journal of Applied Polymer Science, 56 (8), pp. 985-993.

    Barbosa, Silvia E., Kenny, Jose M. Rheology of thermoplastic matrix short glass fiber composites (1995), Annual Technical Conference – ANTEC, Conference Proceedings, 2, pp. 3116-3122.

    Kenny, Jose M. Chemorheology and processing of short fiber thermosetting matrix composites (1995), Annual Technical Conference – ANTEC, Conference Proceedings, 2, pp. 2782-2789.

    Demma, G., Acierno, D., Russo, P., Kenny, J.M. Functionalization of wood waste and its use in polyester type composite. A preliminary study (1995), Journal of Polymer Engineering, 14 (4), pp. 283-293.

  • 1994

    Kenny, J.M. Application of modeling to the control and optimization of composites processing (1994), Composite Structures, 27 (1-2), pp. 129-139.

    Barbosa, S.E., Ercoli, D.R., Bibbó, M.A., Kenny, JosM. Rheology of short-fiber composites: A systematic approach (1994), Composite Structures, 27 (1-2), pp. 83-91.

    Bellucci, Francesco, Valentino, Maio, Monetta, Tullio, Nicodemo, Luigi, Kenny, Jose, Nicolais, Luigi, Mijovic, Jovan, Impedance spectroscopy of reactive polymers. 1 (1994), Journal of Polymer Science, Part B: Polymer Physics, 32 (15), pp. 2519-2527.

    Mijovic, Jovan, Nicolais, Luigi, D’Amore, Alberto, Kenny, Jose M. Principal features of structural relaxation in glassy polymers A review (1994), Polymer Engineering and Science, 34 (5), pp. 381-389.

    Maffezzoli, A., Trivisano, A., Opalicki, M., Mijovic, J., Kenny, J.M. Correlation between dielectric and chemorheological properties during cure of epoxy-based composites (1994), Journal of Materials Science, 29 (3), pp. 800-808.

  • 1993

    Mijović, J., Kenny, JosM., Nicolais, L. Comparison of kinetic and rheological evaluation of gel time for an amine-epoxy system (1993), Polymer, 34 (1), pp. 207-209.

    Kenny, J.M., Trivisano, A., Kardos, J.B., Khomami, B. Mathematical modelling of the resin transfer molding of high performance composites (1993), International SAMPE Symposium and Exhibition (Proceedings), 38 (2), pp. 1263-1274.

    Mijović, J., Kenny, JosM., Maffezzoli, A., Trivisano, A., Bellucci, F., Nicolais, L. The principles of dielectric measurements for in situ monitoring of composite processing (1993), Composites Science and Technology, 49 (3), pp. 277-290.

    Kenny, J.M., Maffezzoli, A., Nicolais, L. A new kinetic model for polymer crystallization derived by calorimetric analysis (1993), Thermochimica Acta, 227 (C), pp. 83-95.

    Kenny, J.M., Torre, L., Nicolais, L. Short- and long-term degradation of polymer-based composites (1993), Thermochimica Acta, 227 (C), pp. 97-106.

    Maffezzoli, A., Kenny, J.M., Nicolais, L. A macrokinetic approach to crystallization modelling of semicrystalline thermoplastic matrices for advanced composites (1993), Journal of Materials Science, 28 (18), pp. 4994-5001.

    Maffezzoli, A.M., Peterson, L., Seferis, J.C., Kenny, J., Nicolais, L. Dielectric characterization of water sorption in epoxy resin matrices (1993), Polymer Engineering and Science, 33 (2), pp. 75-82.

  • 1992

    Kenny, J.M. Integration of processing models with control and optimization of polymer composites fabrication (1992), pp. 529-544.

    Maffezzoli, A., Kenny, J.M., Nicolais, L. Thermal analysis of thermoplastic matrices for advanced composite materials: poly(phenylene sulphide)(1992), Thermochimica Acta, 199 (C), pp. 133-146.

    Kenny, J.M., Trivisano, A., Frigione, M.E., Nicolais, L. Thermal analysis of standard and toughened high-performance epoxy matrices (1992), Thermochimica Acta, 199 (C), pp. 213-227.

    Trivisano, Antonio, Kenny, Jose M., Nicolais, Luigi, Inserra, Sabato, Voto, Claudio. Control and optimization of autoclave processing of high performance composites (1992), International SAMPE Symposium and Exhibition, 37, pp. 1104-1116.

  • 1991

    Griffing, J.S., Seferis, J.C., Kenny, J.M., Nicolais, L. Process-property studies of weld line strength and thin structure flow in high performance injection molded thermoplastics (1991), International SAMPE Technical Conference, 23, pp. 1149-1160.

    Berglund, Lars A., Kenny, Jose M. Processing science for high performance thermoset composites (1991), SAMPE Journal, 27 (2), pp. 27-37.

    Kenny, Jose M., Trivisano, Antonio, Berglund, Lars A. Chemorheological and dielectric behavior of the epoxy matrix in a carbon fiber prepreg (1991), SAMPE Journal, 27 (2), pp. 39-46.

    Torre, L., Kenny, J.M. Characterization of blends of semicrystalline and amorphous matrices for high performance composites (1991), Annual Technical Conference – ANTEC, Conference Proceedings, 37, pp. 2108-2111.

    Maffezzoli, A., Kenny, J.M., Nicolais, L. Dynamic mechanical analysis of PPS based composites (1991), Annual Technical Conference – ANTEC, Conference Proceedings, 37, pp. 2079-2083.

    Bian, X.S., Ambrosio, L., Kenny, J.M., Nicolais, L., Occhiello, E., Morra, M., Garbassi, F., Dibenedetto, A.T. Effects of surface treatments of fibers on the interfacial properties in single-fiber composites. Part I. Single carbon fiber/epoxy resin composite system (1991,) Journal of Adhesion Science and Technology, 5 (5), pp. 377-388.

STM | Strada di Pentima 4 - 05100 Terni - Italy | Tel + 39 0744 492939 | Fax + 39 0744 492950
Credits | Privacy Policy